sunken slab.......

These are Non - negotiated rates in the market
Post Reply
sahu.mgse
Posts: 190
Joined: June 10th, 2012, 3:13 pm

sunken slab.......

Post by sahu.mgse »

Dear All;

I would like to know from forum members,

Is there method /solution to build toilet floor level with bedroom floor level without sunken slab if i am using western style sheet.

Or any EWC which does not require any sunken slab.....

Note: If i make sunken slab, the bottom projection is visible in Hall area, which i don't want.

The preparation for roof slab is under progress, i need to take decision based on reply....

regards
Sahu
sun
Posts: 226
Joined: March 6th, 2012, 11:46 am
Location: Bangalore

Re: sunken slab.......

Post by sun »

Not an expert, I had the same problem, my contractor suggested, if I am going with Wall mounted EWC, the pipes can be fixed along the wall/inside the wall with grooves and cover it nicely. Not sure how feasible it could be.
Another option that he suggested that go ahead with the sunken slab and then do a POP for hall roof.
sahu.mgse
Posts: 190
Joined: June 10th, 2012, 3:13 pm

Re: sunken slab.......

Post by sahu.mgse »

Thanks Sun.......

yesterday I had discussion with contractor and as you rightly said first option is what he suggested and i preferred and have gone ahead. I need to relocate position of EWC from middle to wall side.He said maximum 2-3" bathroom floor level will be up with respect to other......

Sahu
Post Reply

Return to “Material prices”