Page 1 of 2
MS grill rates for utility area
Posted: March 10th, 2015, 11:26 am
by sholla
I need to put MS grill in the utility area, total area around 300 sq.ft
I received a quote for the same:
9mm square rods
4" spacing
Rs.130 per sq.ft
Does this seem reasonable ?
Regards
sholla
Re: MS grill rates for utility area
Posted: March 11th, 2015, 8:47 am
by nagzzz
Yes. That is the standard price in the market. Reasonable.
Re: MS grill rates for utility area
Posted: March 11th, 2015, 9:32 am
by sholla
Thanks nagazz,
What would be the rate for grill with 10mm rods ?
Re: MS grill rates for utility area
Posted: March 11th, 2015, 11:46 am
by sreekanthrt
That's reasonable rate for a 4/4 safety grill. However you can bargain till 120 rs/sft.
Re: MS grill rates for utility area
Posted: March 11th, 2015, 8:08 pm
by nagzzz
actually, the price of the material is only 30 percent of the overall cost of grill work. so you can easily bargain for 10mm rods at the same price.
Re: MS grill rates for utility area
Posted: March 19th, 2015, 2:10 pm
by zipperboy
You can bargain, i am doing my grill work for Rs 120/sq feet. 11 mm rods.
Re: MS grill rates for utility area
Posted: August 2nd, 2015, 11:51 pm
by kadamati
I also need to do grill work for my flat. please suggest if any knows fabricator around ramamurthy nagar.
Re: MS grill rates for utility area
Posted: August 3rd, 2015, 3:50 pm
by mulemalli
Muthukrishnan grill work. 9738959792.he is good in ramamurthy nagar surroundings
Re: MS grill rates for utility area
Posted: August 9th, 2015, 11:39 am
by mulemalli
I have checked couple of grill work and finally I chosen muthukrishnan based on multiple reference. Prema engineering work muthukrishnan 9738959792. It is up to u. Thanks.
Re: MS grill rates for utility area
Posted: August 10th, 2015, 5:45 pm
by ravindra.cm
My suggestion would be to provide materials and ask for Labour rate (which would be Rs.60/Sq.ft). Always go for Bright steels (square or Hexagonal) although cost would be more but it would be value for money.