Bore-well Pump Installation - DONE
Posted: September 27th, 2013, 10:33 am
Finally got the borewell submersible pump installation day before yesterday - Detail below -
3HP/40stage Texmo Aqua (Single Phase) x 1 No = Rs 24171
3 HP Dry Run protector panel board = Rs 2000
1 1/4 HDPE pipe 12.5 KG - Rs 90/mtr
4 sqmm Finolex cable Rs 85/mtr
SS End fittings x 1 set = Rs 900
Bend collar clamp x 1 set = Rs 900
Transport and Installation = Rs 1000
Approximately 69K with 5.5% VAT
Overall output from the borewell is good, with good pressure.
Guys did a very professional job, happy with the service from this guy. I had few people telling me that there is a chance of "Mixing" in Finolex wires. I had asked this guy to get the entire unopened drum from his storage..drum was opened in-front of me before installation. This guys office is in Sarakkai, near BSK.
3HP/40stage Texmo Aqua (Single Phase) x 1 No = Rs 24171
3 HP Dry Run protector panel board = Rs 2000
1 1/4 HDPE pipe 12.5 KG - Rs 90/mtr
4 sqmm Finolex cable Rs 85/mtr
SS End fittings x 1 set = Rs 900
Bend collar clamp x 1 set = Rs 900
Transport and Installation = Rs 1000
Approximately 69K with 5.5% VAT
Overall output from the borewell is good, with good pressure.
Guys did a very professional job, happy with the service from this guy. I had few people telling me that there is a chance of "Mixing" in Finolex wires. I had asked this guy to get the entire unopened drum from his storage..drum was opened in-front of me before installation. This guys office is in Sarakkai, near BSK.