myBDAsites.com

@pradeepecr
Can you please let me know your findings after you check out this weekend

Hi Keethi,

Sure. I will update on this.

-Pradeep

Hi,

I got mine done about a week back. The bore depth is 800 ft. and the pump is lowered till 650 ft. I've gone for KSB motor. The total bill came to Rs.72000. This includes everything - pump, pipe, cables, transport and installation.

Hi ,
I did install the motor/pump for our bore well. The depth was 360 ft and the pump was installed at 310 ft. Texmo 2 HP single phase, finolex calble, 1.25 pipe (mangalam), panels etc including installation came to 38K.

I have Installed pump for my borewell 2 weeks, Details are below.

Texmo 2 hp 25 stage pump.
Rishie 1.25 '' pipe - 360 feet
finolex electric cable 380 feet
with other fittings came up to 38 K

Today I advanced with Jinanni pumps S.P.Road.

Texmo 4HP 50 Stage 3 Phase - 26.5K
Prime HPDE 16kg - 93 Rs/Mtrs
L&T starter - Rs 3500
Finolex 4 Sq. mm - Rs 86 Rs/Mtrs
Clampset - Rs 1000
End fitting ss/gi - Rs 800
Transportation & Installation - Rs 2600
Total cost around + VAT = 87.5K

1. It seems from tomorrow pump rate raise by 8% & wire 3%.
2. It seems to difference pump from same manufacturer Texmo & Taro (less 1000 Rs). Some dealers says both are same brand to make us to go with taro.
3. Confirm them whether texmo or Taro.

Regards,
Pradeep

Texmo has 2 brands. Taro Taxmo & Aqua Texmo...which one is good??? GOD Knows !! If you still haven't finalized with Jinnani...you may enquire with others too. That whole stretch is inhabited bunch of crooks. There are many shops towards SP road, that give you a better deal.

OldWorldCharm wrote:Hi,

I got mine done about a week back. The bore depth is 800 ft. and the pump is lowered till 650 ft. I've gone for KSB motor. The total bill came to Rs.72000. This includes everything - pump, pipe, cables, transport and installation.

Hi,
My borewell has similar depth as yours. Can you please let me know the specifications of your motor and cost split up. This would really help me.

@Pradeep, I found this link
http://www.buildkart.com/index.php?route=product/product&product_id=82
Thought this might help you

Hi Keerthi,

Here are the details -

1. 3HP/45 Stage KSB motor - 24850
2. Shanthi Panel Board - 3650
3. 63 Grade HDPE pipe (196 mtrs x Rs. 73) - 15112
4. SS End Fittngs - 750
5. MYSO cable (212 mtrs x Rs. 89) - 18868
6. Clamp and cap - 450
7. Other fittings - 1100
8. PP (Supporting) rope (200 mtrs x Rs. 20) - 4000
9. Transportation + Installation - 3000

Hope this helps.