Load Bearing Construction on very old existing foundation

Post Reply
bala4034
Posts: 22
Joined: August 4th, 2013, 7:16 pm

Load Bearing Construction on very old existing foundation

Post by bala4034 »

Hi Friends, need your expertise:
I have built foundation for a load bearing building some 18 years back with random rubble work and a concrete band on top, still appears in good condition although some pointing cement on basement (upper portion, above ground, 2 feet high) is gone due to so many years of weather changes etc.
My question is can I construct my super structure on these very old existing foundation.
Your quick answer will be highly appreciated.
Regards.
Bala
User avatar
ardesarchitects
Posts: 1076
Joined: June 20th, 2009, 2:12 pm

Re: Load Bearing Construction on very old existing foundation

Post by ardesarchitects »

Hi, Bala
You can construct on a load bearing foundation provided below points are checked properly.

1. Depth and width of the SSM wall foundation done
2. Ground floor wall thickness
3. Typical plan on the first floor or any changes
4. In case of not wall above wall few upgradations or additions to structures one or two floor can be possible
5. Beams used in the ground floor roof slab is also important to be checked.
6. Soil bearing capacity


Regards,
Ar.Praveen.N
Ardes Architects and Interior designers
ardesarchitects@gmail.com
www.ardesarchitects.com
https://www.instagram.com/ardesarchitects
bala4034
Posts: 22
Joined: August 4th, 2013, 7:16 pm

Re: Load Bearing Construction on very old existing foundation

Post by bala4034 »

Thank you Praveen for your expert answer,
still I have few questions:
1. Do I need a load test on those foundation?
2. What method can be used for filling up pointing
joints between the RR work which already damaged.
there is any need of adhesive prior to apply the grout.
Regards.
Bala.
Post Reply

Return to “Civil Construction”