Hi,
Which sealer should I use at the back of light /white color granites so that it doesn't absorb moisture and get rusted ?
0suggesting "wilber" back side sealer at 900rs per liter.
Also any suggestions for top sealer after laying finishing?
Any information on
Product name/brands and application method/ coverage area will be helpful.
Regards
Granite Stone Sealer
-
Visualizer
- Posts: 375
- Joined: June 1st, 2018, 6:24 pm
-
Visualizer
- Posts: 375
- Joined: June 1st, 2018, 6:24 pm
Re: Granite Stone Sealer
Purchased two sealers 1 liter each will try each of them and increase quantity based on test results.
1. MYK Laticrete 190 : 450 rs for 1 liter can
2. Sealer SC 99 : 800 rs for 1 liter
Item #2 is from some manufacturer in Jaipur just purchased based on recommendation of shopkeeper that this one is more popular and give better results but I am skeptical.
1. MYK Laticrete 190 : 450 rs for 1 liter can
2. Sealer SC 99 : 800 rs for 1 liter
Item #2 is from some manufacturer in Jaipur just purchased based on recommendation of shopkeeper that this one is more popular and give better results but I am skeptical.
-
Visualizer
- Posts: 375
- Joined: June 1st, 2018, 6:24 pm
Re: Granite Stone Sealer
Tested MYK Laticrete 190 on brick yesterday.
There Was absolutely no change in color, and texture of brick water forms beads and drops off the brick surface. So this is perfect exposed brick wall sealer.
Laticrete 190 itself looks like water.
Sealer SC 99 is little milky and thicker after application on stone there is no colour change both Laticrete and sealer sc 99 gets absorbed quickly. Will do water test tomorrow.
There Was absolutely no change in color, and texture of brick water forms beads and drops off the brick surface. So this is perfect exposed brick wall sealer.
Laticrete 190 itself looks like water.
Sealer SC 99 is little milky and thicker after application on stone there is no colour change both Laticrete and sealer sc 99 gets absorbed quickly. Will do water test tomorrow.